# FILL Command
[GstarCAD 2016](../../Index.md) → [Commands](../%28Commands%29.md) → [F](%28F%29.md)
The FILL command is used to control the filling of objects such as hatches, 2D solids, and wide polylines.
## Command Access:
> **Command:** FILL (or 'fill for transparent use)
## Command Prompts:
> Enter mode \[ON/OFF\]
> \<ON\>:
Relative Glossary:
**ON:**
Turn on the FILL mode. In order to display 3D objects, the extruding direction must be parallel with current observation direction and the hidden lines must be visible.
**OFF:**
Turn off the FILL mode. Only display and print the profile of objects. The FILL mode only has effect on existing objects rather than Lineweight.
 
## Other versions with matching text
[GstarCAD 2017](../../../2017/Commands/F/FILL%20Command.md) · [GstarCAD 2018](../../../2018/Commands/F/FILL%20Command.md) · [GstarCAD 2019](../../../2019/Commands/F/FILL%20Command.md) · [GstarCAD 2020](../../../2020/Commands/F/FILL%20Command.md) · [GstarCAD 2021](../../../2021/Commands/F/FILL%20Command.md)