# HPDRAWORDER System Variable [GstarCAD 2015](../../Index.md) → [System Variables](../%28System%20Variables%29.md) → [H](%28H%29.md) | | | | --- | --- | | Type | Integer | | Saved-in | Not saved | | Initial value | 0 | | Range | 0-4 | Specifies the draw order of hatches and fills. Stores the Draw Order setting from the Hatch and Gradient dialog box. 0 Do not assign. The hatch or fill is not assigned a draw order. 1 Send to back. The hatch or fill is sent to the back of all other objects. 2 Bring to front. The hatch or fill is brought to the front of all other objects. 3 Behind boundary. The hatch or fill is sent behind the hatch boundary. 4 Front of boundary. The hatch or fill is brought in front of the hatch boundary --- ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/System%20Variables/H/HPDRAWORDER%20System%20Variable.md)