# ZOOM Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [Z](%28Z%29.md)
## Function Description:
> Increase or decrease the apparent size of objects in the current viewport
**Menu:**
> View\>Zoom
**Command Entry**:
> ZOOM
**Command Prompt:**
> \[All/Center/Dynamic/Extents/Previous)/In/Out/Left/Right/Window/Scale(nX/nXP)\] \<Real Time\>
>
> **Out:** Zoom out current drawing
>
> **In:** Zoom in current drawing
>
> **All:** Zoom to display the entire drawing in the current viewport. In a plan view, All zooms to the grid limits or current extents, whichever is greater. In a 3D view, ZOOM All is equivalent to ZOOM Extents. The display shows all objects even if the drawing extends outside the grid limits.
>
> **Dynamic:** Zoom to display the generated portion of the drawing with a view box. The view box represents your viewport, which you can shrink or enlarge and move around the drawing. Positioning and sizing the view box pans or zooms to fill the viewport with the image inside the view box.
>
> **Center:** Zoom to display a window defined by a center point and a magnification value or height. A smaller value for the height increases the magnification. A larger value decreases the magnification.
>
> **Extents:** Zoom to display the drawing extents and results in the largest possible display of all the objects.
>
> **Left:** View window by low left corner point or scale or height.
>
> **Previous:** Zoom to display the previous view. You can restore up to 10 previous views.
>
> **Right:** View window by top right corner point or scale or height.
>
> **Window:** Zoom to display an area specified by two opposite corners of a rectangular window.
>
> **nX/nXP:** Zoom the display at a specified scale factor.
>
> **Real Time:** Use the pointing device, zoom interactively to a logical extent.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/Z/ZOOM%20Command.md)