# UNITS Command Line [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [U](%28U%29.md) **Function Description:** > Display the measure unit and value for every selected object. **Command Entry:** > UNITS **Command Prompt:** > Unit mode 1-5 \<2\>: > > 1\. Scientific 4.225E\+01 > > 2\. Decimal 42.25 > > 3\. Engineering 3'-6.25" > > 4\. Architectural 3'-6 1/4" > > 5\. Fractional 42 1/4 > > The following prompt for decimal precision is displayed if you specify the scientific, decimal, or engineering format: > > Enter number of digit to right of decimal point (0 to 8\) \<current\>: Enter a value (0-8) or press ENTER > > The following prompt for the denominator of the smallest fraction is displayed if you specify the architectural or fractional format. > > Enter denominator of smallest fraction to display > > (1, 2, 4, 8, 16, 32, 64, 128, or 256\) \<current\>: Enter a value (1, 2, 4, 8, 16, 32, 64, 128, or 256\) or press ENTER > > The next prompt is for angle formats and precision: > > System of angle measure: (Examples) > > 1\. Decimal degrees 45.0000 > > 2\. Degrees/minutes/seconds 45d0'0" > > 3\. Grads 50.0000g > > 4\. Radians 0.7854r > > 5\. Surveyor's units N 45d0'0" E > > Enter choice, 1 to 5 \<current\>: Enter a value (1-5) or press ENTER > > Enter number of fractional places for display of angles (0 to 8\) \<current\>: Enter a value (0-8) or press ENTER > > The next prompt is for the direction for angle 0: > > Direction for angle 0: > > East 3 o'clock \= 0 > > North 12 o'clock \= 90 > > West 9 o'clock \= 180 > > South 6 o'clock \= 270 > > Enter direction for angle 0 \<current\>: Enter a value or press ENTER > > The default direction for 0 degrees is to the east quadrant, or 3 o'clock. The default direction for positive angular measurement is counterclockwise. > > Measure angle clockwise? \[Yes/No\] \<current\>: Enter y or n or press ENTER ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/U/UNITS%20Command%20Line--02c83f73deb4.md)