# TABSURF Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [T](%28T%29.md) ## Function Description: > Create a tabulated mesh from a path curve and a direction vector **Menu:** > Draw\>Modeling\>Mesh\>Tabulated Mesh **Command Entry:** > TABSURF **Command Prompt:** > Select objects to extrude: > > The path curve defines the approximated surface of the polygon mesh. It can be a line, arc, circle, ellipse, or 2D or 3D polyline. The mesh is drawn starting at the point on the path curve closest to the selection point. > > Select line or open polyline for extrusion path: > > Only the first and last points on a polyline are considered, and intermediate vertices are ignored. The direction vector indicates the direction and length of the shape to be extruded. The end selected on the polyline or line determines the direction of the extrusion. The original path curve is drawn with wide lines to help you visualize how the direction vector dictates the construction of a tabulated mesh. > > TABSURF constructs a 2 by n polygon mesh, where n is determined by the SURFTAB1 system variable. The M direction of the mesh is always 2 and lies along the direction vector. The N direction lies along the path curve. If the path curve is a line, arc, circle, ellipse, or spline-fit polyline, tabulation lines are drawn that divide the path curve into intervals of equal size set by SURFTAB1. If the path curve is a polyline that has not been spline fit, tabulation lines are drawn at the ends of straight segments, and each arc segment is divided into intervals set by SURFTAB1. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/T/TABSURF%20Command.md)