# STATUS Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md)
**Function Description:**
> Display drawing statistics, modes, and extents
**Menu:**
> Tools\>Inquiry\>Status
**Command Entry:**
> STATUS
>
> **Drawing limits are**
>
> Display the drawing limit defined by LIMIT
>
> **Paper Space Limits Are**
>
> Display the grid limits defined by LIMITS.The first line shows the XY coordinate of the limit's lower-left corner. The second line shows the XY coordinate of the limit's upper-right corner.
>
> **Insertion Base Is**
>
> Display the insertion point of the drawing, expressed as an X,Y,Z coordinate.
>
> **Snap Resolution Is**
>
> Display the snap spacing in the X and Y directions, stored in the SNAPUNIT system variable.
>
> **Grid Spacing Is**
>
> Display the grid spacing in the X and Y directions, stored in the GRIDUNIT system variable.
>
> **Current Layer**
>
> List the current layer of the drawing, stored by the CLAYER system variable.
>
> **Current Color**
>
> List the current color, stored by the CECOLOR system variable.
>
> **Current Linetype**
>
> List the current linetype, stored by the CELTYPE system variable.
>
> **Current Elevation**
>
> List the current elevation of the drawing, stored in the ELEVATION system variable.
>
> **Current thickness**
>
> List the current thickness, stored in the THICKNESS system variable.
>
> **Fill, Grid, Ortho, Snap, Blips, Drag**
>
> Show whether these modes are on or off.
>
> **Positive angle direction**
>
> Display the direction when angle is positive.
>
> **Angular units**
>
> Display the current angular unit
>
> **Pickbox height**
>
> Display the pickbox size in current drawing.
>
> **Entities in drawing**
>
> Display the entities in current drawing
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/S/STATUS%20Command--fe69a699dc8f.md)