# STATUS Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md) ## Function Description: > Display drawing statistics, modes, and extents **Menu:** > Tools\>Inquiry\>Status **Command Entry:** > STATUS > > **Drawing limits are** > > Display the drawing limit defined by LIMIT > > **Paper Space Limits Are** > > Display the grid limits defined by LIMITS.The first line shows the XY coordinate of the limit's lower-left corner. The second line shows the XY coordinate of the limit's upper-right corner. > > **Insertion Base Is** > > Display the insertion point of the drawing, expressed as an X,Y,Z coordinate. > > **Snap Resolution Is** > > Display the snap spacing in the X and Y directions, stored in the SNAPUNIT system variable. > > **Grid Spacing Is** > > Display the grid spacing in the X and Y directions, stored in the GRIDUNIT system variable. > > **Current Layer** > > List the current layer of the drawing, stored by the CLAYER system variable. > > **Current Color** > > List the current color, stored by the CECOLOR system variable. > > **Current Linetype** > > List the current linetype, stored by the CELTYPE system variable. > > **Current Elevation** > > List the current elevation of the drawing, stored in the ELEVATION system variable. > > **Current thickness** > > List the current thickness, stored in the THICKNESS system variable. > > **Fill, Grid, Ortho, Snap, Blips, Drag** > > Show whether these modes are on or off. > > **Positive angle direction** > > Display the direction when angle is positive. > > **Angular units** > > Display the current angular unit > > **Pickbox height** > > Display the pickbox size in current drawing. > > **Entities in drawing** > > Display the entities in current drawing ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/S/STATUS%20Command.md)