# SOLIDEDIT Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md)
**Function Description
:**
> Edit faces and edges of 3D solid object.
**Menu:**
> Modify\>Solid Editing
**Command Entry:**
> SOLIDEDIT
**Command Prompt:**
> Enter a solids editing option: Face/Edge/Body/Undo/\<eXit\>:
>
> **Face**
>
> Edit 3D solid faces by extruding, moving, rotating, offsetting, tapering, deleting, copying, or changing the color of the selected faces.
>
> Enter a face editing option: Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/Undo/\<eXit\>:
>
> > **Extrude**
> >
> > Extrude selected planar faces of a 3D solid object to a specified height or along a path. You can select multiple faces at one time.
> >
> > Select faces or \[Remove/Undo\]: Select one or more faces or enter an option
> >
> > Select faces or \[Remove/Undo/ALL\]: Select one or more faces or enter an option
> >
> > Remove
> >
> > Remove previously selected faces from the selection set. The following prompt is displayed.
> >
> > Remove faces or \[Add/Undo\]:
> >
> > Select faces or \[Remove/Undo/ALL\]:
> >
> > Add
> >
> > Add faces to the selection set.
> >
> > Undo
> >
> > Cancel the selection of the faces you removed most recently from the selection set and redisplays the prompt. If no faces are currently selected, the following prompt is displayed.
> >
> > All
> >
> > Select all faces and adds them to the selection set.
> >
> > Specify height of extrusion or Path:
> >
> > Height of Extrusion
> >
> > Set the direction and height of the extrusion. Entering a positive value extrudes the face in the direction of its normal. Entering a negative value extrudes the face in the direction opposite to its normal.
> >
> > Path
> >
> > Set a path for the extrusion path based on a specified line or curve. All the profiles of the selected face are extruded along the chosen path to create the extrusion
> >
> > **Move**
> >
> > Move the selected face on a 3D solid object to a specified height or distance. You can select multiple faces at one time.
> >
> > Select faces or \[Remove/Undo\]:
> >
> > Select faces or \[Remove/Undo/ALL\]:
> >
> > Specify Base point or \[Vector\]:
> >
> > Specify end point:
> >
> > **Rotate**
> >
> > Rotates one or more faces or a collection of features on a solid about a specified axis.
> >
> > Select faces or \[Remove/Undo\]:Select one or more faces or enter an option
> >
> > Select faces or \[Remove/Undo/ALL\]:
> >
> > Specify the base point:Specify another point along axis:
> >
> > Specify the rotation angle:
> >
> > **Offset**
> >
> > Offset faces equally by a specified distance or through a specified point. A positive value increases the size or volume of the solid, a negative value decreases the size or volume of the solid.
> >
> > Select faces or \[Undo/Remove\]: Select one or more faces or enter an option
> >
> > The descriptions of the Undo, Remove, Add, and All options match the descriptions of the corresponding options under Extrude. After you select faces or enter an option, the following prompt is displayed:
> >
> > Select faces or \[Undo/Remove/ALL\]: Select one or more faces, enter an option, or press ENTER
> >
> > Specify the offset distance: Specify a distance
> >
> > Specify a positive value to increase the size of the solid or a negative value to decrease the size of the solid.
> >
> > Note :Holes inside a solid object offset smaller as the volume of the solid gets larger.
> >
> > **Taper**
> >
> > Taper faces with an angle. The rotation of the taper angle is determined by the selection sequence of the base point and second point along the selected vector.
> >
> > Select faces or \[Undo/Remove\]: *Select one or more faces or enter an option*
> >
> > The descriptions of the Undo, Remove, Add, and All options match the descriptions of the corresponding options under Extrude. After you select faces or enter an option, the following prompt is displayed:
> >
> > Select faces or \[Undo/Remove/ALL\]: Select one or more faces , enter an option, or press ENTER
> >
> > Specify the base point: Specify a base point
> >
> > Specify another point along the axis of tapering: Specify a point
> >
> > Specify the taper angle: Specify an angle between -90 and \+90 degrees
> >
> > **Delete**
> >
> > Delete or removes faces, including fillets and chamfers.
> >
> > Select faces or \[Undo/Remove\]: Select one or more faces
> >
> > The descriptions of the Undo, Remove, Add, and All options match the descriptions of the corresponding options under Extrude. After you select faces or enter an option, the following prompt is displayed:
> >
> > Select faces or \[Undo/Remove/ALL\]: Select one or more faces (1), enter an option, or press ENTER
> >
> > Solid validation started.
> >
> > Solid validation completed.
> >
> > **Copy**
> >
> > Copy faces as a region or a body. If you specify two points, SOLIDEDIT uses the first point as a base point and places a single copy relative to the base point. If you specify a single point (usually entered as a coordinate) and then press ENTER, SOLIDEDIT uses the coordinate as the new location.
> >
> > Select faces or \[Remove/Undo\]: Select one or more faces
> >
> > The descriptions of the Undo, Remove, Add, and All options match the descriptions of the corresponding options under Extrude. After you select faces or enter an option, the following prompt is displayed:
> > Select faces or \[Remove/Undo/ALL\]: Select one or more faces , enter an option, or press ENTER
> >
> > Specify a base point or displacement: Specify a base point
> >
> > Specify a second point of displacement: Specify a point
> >
> > **Color**
> >
> > Change the color of faces.
> >
> > Select faces or \[Remove/Undo\]: Select one or more faces
> >
> > Select faces or \[Remove/Undo/ALL\]: Select one or more faces, enter an option, or press ENTER
> >
> > Select Color Dialog Box is displayed.
> >
> > **Undo**
> >
> > Reverse actions as far back as the beginning of the SOLIDEDIT session.
> >
> > **Exit**
> >
> > Exit the face-editing options and displays the Enter a Solids Editing Option prompt.
>
> **Edge**
>
> Edit 3D solid objects by changing the color of or copying individual edges.
>
> Enter an edge editing option: Copy/coLor/Undo/\<eXit\>:
>
> > **Copy**
> >
> > Copies 3D edges. All 3D solid edges are copied as a line, arc, circle, ellipse, or spline.
> >
> > Select edges or \[Remove/Undo\]:
> >
> > Select edges or \[Remove/Undo/ALL\]:
> >
> > After you select edges or enter an option, the following prompt is displayed:
> >
> > Select edge or \[Undo/Remove\]: Select one or more edges or press ENTER
> >
> > Specify a base point of displacement: Specify a base point
> >
> > Specify a second point of displacement: Specify a point
> >
> > **Color**
> >
> > Change the color of edges.
> >
> > Select edges or \[Remove/Undo\]:
> >
> > Select edges or \[Remove/Undo/ALL\]:
> >
> > The descriptions of the Undo, Remove, Add, and All options match the descriptions of the corresponding options under Copy. After you select edges or enter an option, the Select Color Dialog Box is displayed.
>
> **Body**
>
> Edit the entire solid object by imprinting other geometry on the solid, separating the solid into individual solid objects, shelling, cleaning, or checking the selected solid.
>
> Enter a body editing option Imprint/seParate/Shell/cLean/Check/Undo/\<eXit\>:
>
> > **Imprint**
> >
> > Imprint an object on the selected solid. The object to be imprinted must intersect one or more faces on the selected solid in order for imprinting to be successful. Imprinting is limited to the following objects: arcs, circles, lines, 2D and 3D polylines, ellipses, splines, regions, bodies, and 3D solids.
> >
> > Select 3d solid:
> > Select an object to imprint:
> >
> > Delete the source object\[Yes/No\]\<No\>:
> >
> > Delete the source object\[Yes/No\]\<No\>:
> >
> > **Separate**
> >
> > Separate 3D solid objects with disjointed volumes into independent 3D solid objects.
> >
> > Select a 3D solid: Select an object
> >
> > **Shell**
> >
> > Shelling creates a hollow, thin wall with a specified thickness. You can specify a constant wall thickness for all the faces. You can also exclude faces from the shell by selecting them. A 3D solid can have only one shell. New faces are created by offsetting existing ones outside their original positions.
> >
> > Select 3d solid:
> > Remove faces or \[Add/Undo/ALL\]:
> >
> > The descriptions of the Undo, Remove, Add, and All options match the descriptions of the corresponding options under Extrude. After you select faces or enter an option, the following prompt is displayed:
> >
> > Remove faces or \[Undo/Add/ALL\]: Select a face (1), enter an option, or press ENTER
> >
> > Enter the shell offset distance: Specify a distanceSpecifying a positive value creates a shell to the inside perimeter of the solid; specifying a negative value creates a shell to the outside perimeter of the solid.
> >
> > **Clean**
> >
> > Remove shared edges or vertices having the same surface or curve definition on either side of the edge or vertex. Removes all redundant edges, vertices, and unused geometry. Does not remove imprinted edges.
> >
> > Select 3d solid:
> >
> > **Check**
> >
> > Validate the 3D solid object as a valid solid.
> >
> > Select 3D solid: Select an object
> >
> > This object is a valid ShapeManager solid.
> >
> > **Undo**
> >
> > Undoes the editing action.
> >
> > **Exit**
> >
> > Exit the face-editing options and displays the Enter a Solids Editing Option prompt.
>
> **Undo**
>
> Undo the editing action.
>
> **Exit**
>
> Exit the SOLIDEDIT Command.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/S/SOLIDEDIT%20Command.md)