# SNAP Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md) **Function Description:** > Restrict cursor movement to specified intervals **Command Entry:** > SNAP **Command Prompt:** > When snap mode is off: > > Snap is off (x and y \= 0.5000): \[ON/Rotate/Style/Aspect\]\<Snap spacing\>: > > When snap mode is on: > > Snap is on, x and y \= 0.5000: \[OFF/Rotate/Style/Aspect\]\<Snap spacing\>: > > **Snap Spacing** > > Activate Snap mode with the value you specify. > > **On** > > Activate Snap mode using the current settings of the snap grid. > > **Off** > > Turn off Snap mode but retains the current settings. > > **Rotate** > > Set the origin and rotation of the snap grid. > > Base point for snap grid \<Current\>: > > Rotation angle \<Current\>: > > The rotation angle is measured relative to the current UCS. You can specify a rotation angle between –90 and 90 degrees. A positive angle rotates the grid counterclockwise about its base point. A negative angle rotates the grid clockwise. > > **Style** > > Specify the format of the snap grid, which is Standard or Isometric. > > \[Isometric/Standard\]\<Standard\>: > > > **Standard** > > > > Set a rectangular snap grid that is parallel to the XY plane of the current UCS. X and Y spacing may differ. > > > > \[Aspect\]Vertical spacing \<Current\>: > > > > > **Vertical spacing** > > > > > > Specifie the spacing of the snap grid on Y direction,at this time X direction spacing is equal to Y direction. > > > > > > **Aspect** > > > > > > Specify the > > > spacing of the snap grid on X and Y direction. > > > > > > Horizontal spacing \<Current\> :Specify a distance or press ENTER > > > > > > Vertical spacing \<Current\>:Specify a distance or press ENTER > > > > **Isometric** > > > > Specify the spacing of the > > snap grid on X and Y direction. > > > > Horizontal spacing \<Current\> :Specify a distance or > > press ENTER > > > > Vertical spacing \<Current\>:Specify a distance or press > > ENTER ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/S/SNAP%20Command--33b731704ddb.md)