# SKETCH Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md) ## Function Description: > Create a series of freehand line segments. **Command Entry:** > SKETCH Command Prompt: > Freehand: Length of segments \<Current\>: > > The record increment value defines the length of the line segments. The pointing device must be moved a distance greater than the increment value to generate a line. > > Sketching is captured as a series of independent lines. Setting the SKPOLY system variable to a nonzero value produces a polyline for each contiguous sequence of sketched lines rather than multiple line objects. > > Press ENTER to end/Pen down/(Begin...) > > User don't have to press mouse all the time when creating line segments. > > Press ENTER to end/Pen up/Quit/Delete on/Connect/Straight to cursor/ Write to drawing/(Sketching...): > > **Exit** > > Press ENTER to end the Command > > **Pen Up** > > Raise and lowers the sketching pen. The pen must be raised before you can select menu items with the pointing device. > > **Quit** > > Discard all temporary lines sketched since the start of SKETCH or the last use of the Record option, and ends the Command. > > **Delete on** > > Delete all the pars of temporary segment if sketching pen has been lowered then raised it > > **Connect** > > Lowers the pen to continue a sketch sequence from the endpoint of the last sketched line or last Erase. > **Straight to cursor** > > Lower the pen, draws a straight line from the endpoint of the last sketched line to the pen's current location, and returns the pen to the up position. > > **Write to drawing** > > It is similar to end Command,but it will not end the Command ,system will continue to prompt to create freehand line segments. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/S/SKETCH%20Command.md)