# SECTION Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md) Use the intersection of a plane and solids to create a region. Command Access: > **Command entry:** SECTION Command Prompts: > Select objects: *Use an object selection method and press* ENTER *to finish* > > Specify first point on section plane or Object/Zaxis/View/XY/YZ/ZX: > > **First Point on Section Plane:**Use three points to define the sectioning plane. After you specify the first point, the following prompts are displayed: > > > Specify second point on plane: *Specify a point* > > > > Specify third point on plane: *Specify a point* > > **Object:** The sectioning plane is aligned with a circle, ellipse, circular or elliptical arc, 2D spline, or 2D polyline segment. > > > Select a circle, ellipse, arc, 2D-spline, or 2D-polyline: > > **Z Axis:** Define the sectioning plane by specifying a point on the sectioning plane and another point on the plane's*Z* axis (normal). > > > Specify a point on the section plane: > > > > Specify a point on the Z-axis (normal) of the plane: > > **View:** The sectioning plane is aligned with the current viewport's viewing plane. The location of the sectioning plane is defined by a specified point. > > > Specify a point on the current view plane \<0,0,0\>: > **XY:** The sectioning plane is aligned with the *XY* plane of the current UCS. > > > Specify a point on the XY-plane \<0,0,0\>: Specify a point or press ENTER > > **YZ:** The sectioning plane is aligned with the *YZ* plane of the current UCS. > > > Specify a point on the YZ-plane \<0,0,0\>: *Specify a point or press* ENTER > > **ZX:** The sectioning plane is aligned with the *ZX* plane of the current UCS. > > > Specify a point on the ZX-plane \<0,0,0\>: *Specify a point or press* ENTER ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/S/SECTION%20Command--8aec843403ef.md)