# REVSURF Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [R](%28R%29.md)
Creates a revolved mesh about a selected axis.
Command Access:
> **Menu:** Draw \> Modeling \> Mesh \> Revolved Mesh
>
> **Command entry:** REVSURF
Command Prompts:
> Select an entity to revolve: *Select a line, arc, circle, or 2D or 3D polyline*
>
> Select the axis of revolution: *Select a line or open 2D or 3D polyline*
>
> The mesh is defined by the path curve sweeping about the selected axis. The path curve difines the N direction of the mesh. If a circle or a closed polyline is selected as the path curve, the mesh in the N direction is closed.
>
> The vector from a polyline's first vertex to its last vertex determines the rotation axis. All of the intermediate vertices are ignored. M direction of the mesh is determined by the axis of revolution.
>
> Specify start angle \<0\>: *Enter a value or press* ENTER
>
> Specify included angle (\+\=ccw, -\=cw) \<360\>: *Enter a value or press* ENTER
>
> **Start Angle :** Specify where to start the mesh of revolution. If the start angle is set to a nonzero value, the mesh of revolution will begin at an offset from the generation path curve.
>
> **Included Angle :** Specify how far about the axis of revolution the mesh extends.The included angle is the distance through which the path curve is swept.The circle will be prevented from closing if you enter an included angle that is less than a full cricle.
>
> The direction of revolution is affected by the point you use to select the axis of revolution.
>
> The density of the generated mesh is controlled by the system variables SURFTAB1 and SURFTAB2. If the path curve is a line, arc, circle, or spline-fit polyline, the number of tabulation lines that are drawn to divide it into equal-sized intervals is controled by SURFTAB2 . If the path curve is a polyline that has not been spline fit, tabulation lines are drawn at the ends of straight segments, and each arc segment is divided into the number of intervals specified by SURFTAB2.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/R/REVSURF%20Command--272aa292d47c.md)