# REVOLVE Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [R](%28R%29.md) Create a 3D solid or surface by sweeping a 2D object around an axis. Command Access: > **Toolbar:** Modeling > > **Menu:** Draw \> Modeling \> Revolve > > **Command entry:** REVOLVE Command Prompts: > Select objects: > > Specify start point for axis of revolution or define axis by Object/Xaxis/Yaxis: > > **Start point for axis :** Specify the first point of the axis of revolution. The positive axis direction is from the first to the second point. > > > Specify endpoint of axis: > > > > Specify angle of revolution \<360\>: > > **Object:** Select an existing object to be used as an axis. > > > Select line or planar polyline: > > > > Specify angle of revolution \<360\>: > > **X Axis:** Use the positive X axis of the current UCS as the positive axis direction. > > > Specify angle of revolution \<360\>: *Specify an angle or press* ENTER > > **Y Axis:** Use the positive Y axis of the current UCS as the positive axis direction. > > > Specify angle of revolution \<360\>: *Specify an angle or press* ENTER ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/R/REVOLVE%20Command--43b9ae5d3416.md)