# RECTANG Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [R](%28R%29.md) Create a rectangular polyline. Command Access: > **Toolbar:** Draw > > **Menu:** Draw \> Rectangle > > **Command entry:** RECTANG Command Prompts: > Specify first corner point or \[Chamfer/Elevation/Fillet/Thickness/Width\]: > > **First Corner Point :** Specify a corner point of the rectangle. > > > Specify other corner point or \[Area/Dimensions/Rotation\]: *Specify a point or enter an option* > > > > A rectangle is created using the specified points as diagonally opposite corners. > > **Chamfer :** Set the chamfer distances for the rectangle. > > > \[Defaults\]Specify first chamfer distance for rectangles \<0.0000\> : *Specify a distance or press* ENTER > > > > Specify second chamfer distance for rectangles \<5.0000\>: *Specify a distance or press* ENTER > > **Elevation :** Specify the elevation of the rectangle. > > > Specify the elevation for rectangles: *Specify a elevation or press* ENTER > > **Fillet :** Specify the fillet radius of the rectangle. > > > Specify fillet radius for rectangles \<Current\> : *Specify a fillet radius or press* ENTER > > **Thickness :** Specify the thickness of the rectangle. > > > Specify thickness for rectangles: *Specify a thickness or press* ENTER > > **Width :** Specify the polyline width of the rectangle. > > > \[Default pline width\] Rectangle width \<Current\> : *Specify a width or press* ENTER ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/R/RECTANG%20Command--a6fdc79b9de2.md)