# RECTANG Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [R](%28R%29.md)
Create a rectangular polyline.
## Command Access:
> **Toolbar:** Draw
>
> **Menu:** Draw \> Rectangle
>
> **Command entry:** RECTANG
## Command Prompts:
> Specify first corner point or \[Chamfer/Elevation/Fillet/Thickness/Width\]:
>
> **First Corner Point :** Specify a corner point of the rectangle.
>
> > Specify other corner point or \[Area/Dimensions/Rotation\]: *Specify a point or enter an option*
> >
> > A rectangle is created using the specified points as diagonally opposite corners.
>
> **Chamfer :** Set the chamfer distances for the rectangle.
>
> > \[Defaults\]Specify first chamfer distance for rectangles \<0.0000\> : *Specify a distance or press* ENTER
> >
> > Specify second chamfer distance for rectangles \<5.0000\>: *Specify a distance or press* ENTER
>
> **Elevation :** Specify the elevation of the rectangle.
>
> > Specify the elevation for rectangles: *Specify a elevation or press* ENTER
>
> **Fillet :** Specify the fillet radius of the rectangle.
>
> > Specify fillet radius for rectangles \<Current\> : *Specify a fillet radius or press* ENTER
>
> **Thickness :** Specify the thickness of the rectangle.
>
> > Specify thickness for rectangles: *Specify a thickness or press* ENTER
>
> **Width :** Specify the polyline width of the rectangle.
>
> > \[Default pline width\] Rectangle width \<Current\> : *Specify a width or press* ENTER
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/R/RECTANG%20Command.md)