# MVIEW Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [M](%28M%29.md)
Create and control layout viewports.
Command Access:
> **Command entry:** MVIEW
Command Prompts:
> Viewports: \[ON/OFF/Fit/2/3/4/Polygon/Object\]\<First corner\>: *Specify a point or enter an option or press* ENTER
>
> **First Corner :** Specify a corner for rectangular viewport.
>
> **On :** Make a selected viewport active. Objects in model space are displayed in an active viewport.
>
> **Off :** Make a selected viewport inactive. Objects in model space are not displayed in an inactive viewport.
>
> **Fit :** Create one viewport that fills the layout to the edges of the printable area.
>
> **Object :** Specify a closed polyline, ellipse, spline, region, or circle to convert into a viewport. The polyline must be closed and contain at least three vertices.
>
> **Polygon :** Using specified points to create an irregularly shaped viewport.
>
> > ENTER to use last point\[Follow\]\<Start of polyline\>: *Specify a point or enter an option*
> >
> > \[Arc/Distance/Follow/Halfwidth/Width/Undo\]\<Next point\>: *Specify next point or enter an option*
> >
> > **Arc :** Add arc segments to the polygonal viewport.
> >
> > **Halfwidth :** Specify the start halfwidth and end halfwidth of an arc.
> >
> > **Width :** Specify the start width and end width of an arc.
> >
> > **Distance :** Specify the length and angle of a line segment to create the polygon viewport boundary.
> >
> > **Follow :** Draw a line segment of a specified length at the same angle as the previous segment. If the previous segment is an arc, the new line segment is drawn tangent to that arc segment.
> >
> > **Undo :** Remove the most recent segment added to the polygonal viewport.
>
> **2 :** Divide the specified area into two viewports of equal size horizontally or vertically.
>
> > Two viewports: \[Horizontal/Vertical\]\<Vertical\>:
>
> **3 :** Divide the specified area into three viewports.
>
> > Three viewports: \[Horizontal/Vertical/Above/Below/Left/Right\]\<Right\>:
>
> **4 :** Divide the specified area horizontally and vertically into four viewports of equal size.
>
> > \[Fit to screen\]\<First corner of bounding rectangle\>: *Specify a point or enter f*
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/M/MVIEW%20Command--fc6164cadf15.md)