# MINSERT Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [M](%28M%29.md)
Insert multiple instances of a block in a rectangular array.
## Command Access:
> **Command entry:** MINSERT
## Command Prompts:
> Enter block name or \[?\]: *Enter a name, enter ? to list the currently defined blocks in the drawing*
>
> Enter \~ to display the Insert Block Dialog Box, in which you can specify the file to insert block.
>
> Insertion point for block: *Specify base point*
>
> Corner/XYZ/X scale factor \<1.000000\>: *Enter value, options or press* ENTER.
>
> **X Scale Factor:** Set X and Y scale factors.
>
> > Enter Y scale factor \<use X scale factor\>: *Enter a value or press* ENTER *to use the same scale factor*
> >
> > Specify rotation angle \<0\>:
> >
> > The rotation angle sets the angle of the individual block inserts and also sets the angle of the entire array.
> >
> > Enter number of rows (---) \<1\>: *Enter a positive value*
> >
> > Enter number of columns (\| \| \|) \<1\>: *Enter a positive value*
> >
> > If you specify more than one row, the following prompt is displayed:
> >
> > Enter distance between rows or specify unit cell (---): *Enter a value, or specify two points to define a box whose width and height represent the distance between rows and between columns*
> >
> > If you specify more than one column and no unit cell, the following prompt is displayed:
> >
> > Specify distance between columns ( \| \| \| ): *Enter a value or specify a distance*
>
> **XYZ:** Set X, Y, and Z scale factors.
>
> > Specify X scale factor or \[Corner\] \<1\>: *Enter a value or press* ENTER *to use the same scale factor*
> >
> > If you enter c, you specify a corner point. The specified point and the block insertion point determine the X and Y scale factors.
> >
> > Specify Y scale factor or \<use X scale factor\>: *Enter a value or press* ENTER *to use the same scale factor*
> >
> > Enter Z scale factor \<use X scale factor\>: *Enter a value or press* ENTER *to use the same scale factor*
> >
> > Specify rotation angle \<0\>:
> >
> > The rotation angle sets the angle of the individual block inserts and also sets the angle of the entire array.
> >
> > Enter number of rows (---) \<1\>: *Enter a positive value*
> >
> > Enter number of columns (\| \| \|) \<1\>: *Enter a positive value*
> >
> > If you specify more than one row, the following prompt is displayed:
> >
> > Enter distance between rows or specify unit cell (---): *Enter a value, or specify two points to define a box whose width and height represent the distance between rows and between columns*
> >
> > If you specify more than one column and no unit cell, the following prompt is displayed:
> >
> > Specify distance between columns ( \| \| \| ): *Enter a value or specify a distance*
>
> **Corner:** Use the block insertion point and opposite corner to set the scale factor.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/M/MINSERT%20Command.md)