# LENGTHEN Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [L](%28L%29.md)
Change the length of objects and the included angle of arcs.
Command Access:
> **Menu:** Modify \> Lengthen
>
> **Command entry:** LENGTHEN
Command Prompts:
> Edit length: \[DYnamic/Increment/Percent/Total\]\<Select objects to list length\>: *Select one object or enter an option*
>
> **Dynamic:** Turn on Dynamic Dragging mode. Change the length of a selected object by dragging one of its endpoints. The other end remains fixed.
>
> **Increment:** Change the length of an object by a specified increment, measured from the endpoint that is closest to the selection point. If the selected object is an arc, the angle of the arc will be changed by a specified angle. A positive value extends the object; a negative value trims it.
>
> > \[Angle\]\<Enter length increment (0.0000)\>: *Enter length increment or enter a or press* ENTER
> >
> > **Lengthen increment:** Change the length of the object by the specified increment.
> >
> > **Angle:** Change the included angle of the selected arc by the specified angle.
>
> **Percent:** Set the length of an object by a specified percentage of its total length.
>
> > Enter percentage length \<*current*\>: *Enter a positive nonzero value or press* ENTER
> >
> > Select an object to change or \[Mode\]: *Select one object or enter m*
> >
> > The prompt repeats until you press ENTER.
>
> **Total:** Set the length of a selected object by specifying the total absolute length from the fixed endpoint. The included angle of a selected arc also can be set by a specified total angel.
>
> > \[Angle\]\<Enter total length (21.2568)\>: *Enter total lengthen or enter a or press* ENTER
> >
> > **Total Length:** Lengthen the object to the specified value from the endpoint that is closest to the selection point.
> >
> > **Angle:** Set the included angle of the selected arc.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/L/LENGTHEN%20Command--018b57f34f2c.md)