# LENGTHEN Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [L](%28L%29.md) Change the length of objects and the included angle of arcs. ## Command Access: > **Menu:** Modify \> Lengthen > > **Command entry:** LENGTHEN ## Command Prompts: > Edit length: \[DYnamic/Increment/Percent/Total\]\<Select objects to list length\>: *Select one object or enter an option* > > **Dynamic:** Turn on Dynamic Dragging mode. Change the length of a selected object by dragging one of its endpoints. The other end remains fixed. > > **Increment:** Change the length of an object by a specified increment, measured from the endpoint that is closest to the selection point. If the selected object is an arc, the angle of the arc will be changed by a specified angle. A positive value extends the object; a negative value trims it. > > > \[Angle\]\<Enter length increment (0.0000)\>: *Enter length increment or enter a or press* ENTER > > > > **Lengthen increment:** Change the length of the object by the specified increment. > > > > **Angle:** Change the included angle of the selected arc by the specified angle. > > **Percent:** Set the length of an object by a specified percentage of its total length. > > > Enter percentage length \<*current*\>: *Enter a positive nonzero value or press* ENTER > > > > Select an object to change or \[Mode\]: *Select one object or enter m* > > > > The prompt repeats until you press ENTER. > > **Total:** Set the length of a selected object by specifying the total absolute length from the fixed endpoint. The included angle of a selected arc also can be set by a specified total angel. > > > \[Angle\]\<Enter total length (21.2568)\>: *Enter total lengthen or enter a or press* ENTER > > > > **Total Length:** Lengthen the object to the specified value from the endpoint that is closest to the selection point. > > > > **Angle:** Set the included angle of the selected arc. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/L/LENGTHEN%20Command.md)