# LAYOUT Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [L](%28L%29.md) Create and modify drawing layout tabs. ## Command Access: > **Command entry:** LAYOUT ## Command Prompts: > Enter layout option \[Delete/New/Rename/Set/Template/? to list\] \<Set\>: > > **Delete:** Delete a layout. The default is the current layout. The Model tab cannot be deleted. You must select all geometry and use the ERASE command to delete all geometry from the Model tab. > > **New:** Create a new layout tab. Up to 255 layouts can be created in a single drawing. The name of the layout must be unique, it can be upt to 255 characters long and is not case sensitive. Only the first 31 characters are displayed on the tab. > > **Rename:** Rename a layout. The last current layout is used as the default for the layout to rename. > > **Set:** Make a layout to be the current layout. > > **Template:** Create a new layout tab based on an existing layout in a template (DWT), drawing (DWG), or drawing interchange (DXF) file.If the system variable FILEDIA is set to 1, you can select a DWT, DWG or DXF file from a standard file selection dialog box. Then the Insert Layouts Dialog Box is displayed, which lists the layouts saved in the selected file. The layout and all objects from the specified template or drawing file are inserted into current drawing after you select a layout. > > **To list:** List all the layouts defined in the drawing. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/L/LAYOUT%20Command.md)