# HATCH Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [H](%28H%29.md)
Hatch the closed objects with unassociative patterns.
Command Access:
> **Command entry:** HATCH
Function Description:
> Hatch boundary can be composed of one or more closed area. "direct hactch" can define polyline hatch which can hatch unclosed boundary. "pattern hatch" can be saved as a single hatch object.
>
> Auto update will not work when using hatch Command. In general, the line which composes hatch pattern will become block after using hatch Command (except the special).
>
> Hatch and associative hatch can be created in Dialog Box with BHATCH Command.
**Command Prompts:**
> Hatch: \[list patterns/SEttings(?)/for lines(\&)/Preview/STyle\]\<Pattern name\> \<LINES\>: *input pattern name, options or press* ENTER
>
> **Pattern Name:** Specify the style name of hatch pattern.
>
> > Proceed (P)/specify the angle of cursor\<current\>: *input the angular value, input P ,or press* ENTER
> >
> > Specify the row space \<current\>: *input the value of row space, or press* ENTER
> >
> > Whether hatching area in double directions?\<current \>: *input yes or not ,or press* ENTER
> >
> > Hatch directly pressing Enter key/ \< select hatch boundary object \>: *select object, or press* ENTER
> >
> > **Select hatch boundary object**
> >
> > Select object to specify the outer boundary of hatch area, and then select the inner objects within the selected boundary to hatch. The whole block will be selected if the Selected object is a part of a block.
> >
> > **Direct hatch**
> >
> > The boundary will be saved as a polyline \< not (N)\>: *input Y or N ,or press* ENTER
> >
> > The boundary will be saved as a polyline when you input Y. If you input N, the boundary will be abandoned after hatch Command.
> >
> > The start point: *specify a point*
> >
> > Current lineweight: *specify lineweight*
> >
> > Arc(A)/Distance(D)/Follow(F)/Half(H)/Weight(W)/ \<Next point(N)\>: *specify the next point, or input options*
> >
> > You can refer PLINE Command about the above Command prompt. Press ENTER to finish the command.
>
> **List Mode:** The existing mode name and related information will be displayed in text window list.
>
> > List mode \<\*\>: *input \* ,or press* ENTER
>
> **Set(SE):** Display the Drafting Settings dialog box in which you can do some related settings for hatch.
>
> **Linear Hatch(\&):** Specify hatch pattern with line.
>
> > Proceed(P)/specify the angle for the cursor line\<current \>: *input the angular value, or input P, or press* ENTER
>
> **Preview(P):** Set the related attributes in preview mode.
>
> > Preview mode: list mode/set(SE)/linear hatch(\&)/\<current \>: *input options, or press* ENTER
> >
> > **List Mode:** The exiting mode name and related information will be displayed in text window list.
> >
> > **Set:** Display the Drafting Settings dialog boxin which you can do some related settings for hatch.
> >
> > **Linear Hatch:** The same operation with "linear hatch".
>
> **Style(ST):** Confirm the way of filling inner boundary object according to specified style.
>
> > The used hatch mode: All(A)/Outer(O)/\<Standard(S)\>: *input options, or press* ENTER
> >
> > **Standard:** Hatch from the outermost boundary to the innermost boundary.
> >
> > **All:** Do some hatch for outer object, ignore inner objects.
> >
> > **Outer:** System only fills the outermost of the structure, doesn't fill the inner and keep blank because the hatch begins with the two endpoints of hatch line.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/H/HATCH%20Command--f7e29ae72fd4.md)