# GRID Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [G](%28G%29.md) Display a grid pattern in the current viewport. Command Access: > **Command entry:** GRID **Command Prompts:** > If the grid is on, following prompt is displayed: > > Grid is on: \[OFF/Snap/Aspect\]\<Grid spacing (x and y \= 0.5000)\>: *Specify a value or enter an option* > > If the grid is off, following prompt is displayed: > > Grid is off: \[ON/Snap/Aspect\]\<Grid spacing (x and y \= 0.5000)\>: *Specify a value or enter an option* > > **Grid Spacing (X):** Set the grid to the specified value. You can set the grid spacing to the specified value multiplied by the snap interval when you enter *x* after the value. > > **ON:** Turn on the grid using the current grid spacing. > > **Aspect:** Change the grid spacing in the *X* and *Y* directions. > > Specify the horizontal spacing (X) \<*current*\>: *Enter a value or press* ENTER > > Specify the vertical spacing (Y) \<*current*\>: *Enter a value or press* ENTER > > Entering *x* after either value defines it as a multiple of the snap interval rather than the drawing units. This option is not available when the current snap style is Isometric. > > **OFF:** Turn off the grid. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/G/GRID%20Command--00b02fe802eb.md)