# GRID Command
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [G](%28G%29.md)
Display a grid pattern in the current viewport.
## Command Access:
> **Command entry:** GRID
## Command Prompts:
> If the grid is on, following prompt is displayed:
>
> Grid is on: \[OFF/Snap/Aspect\]\<Grid spacing (x and y \= 0.5000)\>: *Specify a value or enter an option*
>
> If the grid is off, following prompt is displayed:
>
> Grid is off: \[ON/Snap/Aspect\]\<Grid spacing (x and y \= 0.5000)\>: *Specify a value or enter an option*
>
> **Grid Spacing (X):** Set the grid to the specified value. You can set the grid spacing to the specified value multiplied by the snap interval when you enter *x* after the value.
>
> **ON:** Turn on the grid using the current grid spacing.
>
> **Aspect:** Change the grid spacing in the *X* and *Y* directions.
>
> Specify the horizontal spacing (X) \<*current*\>: *Enter a value or press* ENTER
>
> Specify the vertical spacing (Y) \<*current*\>: *Enter a value or press* ENTER
>
> Entering *x* after either value defines it as a multiple of the snap interval rather than the drawing units. This option is not available when the current snap style is Isometric.
>
> **OFF:** Turn off the grid.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/G/GRID%20Command.md)