# DIMBASELINE Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [D](%28D%29.md) Use the baseline of the previous dimension or a selected dimension to create a linear, angular, or ordinate dimension. Command Access: > **Menu:** Dimension \> Baseline > > **Command entry:** DIMBASELINE **Command Prompts:** > If no dimension was created in the current session, you are prompted as following: > > Select base dimension: *Select a linear, ordinate, or angular dimension* > > Otherwise, the dimesion object created previously is used as the base dimesion. If the dimension object is linear or angular, the following prompt is displayed: > > Specify a second extension line origin or \[Undo/Select\] \<Select\>: *Specify a point, enter an option, or press* ENTER *to select a base dimension* > > If the base dimension is ordinate, the following prompt is displayed: > > Specify feature location or \[Undo/Select\] \<Select\>: > > Press ENTER twice, or press ESC to end the command. The appearance of the text is determined by the current dimension style. > > **Select:** > > Select a linear, ordinate, or angular dimension as the base dimension > > **Second Extension Line Origin:** > > By default, the first extension line of the base dimension is used as the extension line origin for the baseline dimension. It will be change when you select the base dimension directly, the extension line origin becomes the extension line of the base dimension closest to the pick point of the selection. The baseline dimension is drawn after you select a second point. The prompt for specifying the second extension line origin will repeat until you press ESC. You can also press ENTER to select another linear, ordinate, or angular dimension to use as the base dimension. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/D/DIMBASELINE%20Command--b553bb2e086f.md)