# CHAMFER Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [C](%28C%29.md) Bevel the edges of objects. ## Command Access: > **Menu:** Modify \> Chamfer > > **Command entry:** CHAMFER ## Command Prompts: > Chamfer dist1\=0.0000, dist2\=0.0000: \[Distance/Angle/Trim/mEthod/Polyline/Multiple\] \<Select first entity\>: > > **Distance:** > > Set the distance of the chamfer from the endpoint of the selected edge. > > Polyline: > > Chamfer all connected segments of a 2D polyline specified. > > Select First Entity: > > Specify the first of two edges required to define a 2D chamfer, or the edge of a 3D solid to chamfer. > > Lengths of lines or polylines will be adjust to adapt the chamfer line when they are selected. > > Line segments of 2D polyline must be adjacent or separated by no more than one segment.If they're separated by another polyline segment, CHAMFER deletes the segment that separates them and replaces it with the chamfer. > > If you select an edge on a 3D solid, you must indicate which one adjacent to the edge is the base surface. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/C/CHAMFER%20Command.md)