# ALIGN Command [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [A](%28A%29.md) Align objects with other objects in 2D and 3D. ## Command Access: > **Menu:** Modify \> 3D Operations \> align > > **Command entry:** ALIGN ## Command Prompts: > Select objects: *Select the objects to align and press*ENTER > > Specify either one, two, or three pairs of source points and definition points to align the selected objects. > > **ALIGN Using One Pair of Points:** > > Specify first source point: *Specify a point (1)* > > Specify first destination point: *Specify a point (2)* > > Specify second source point: *Press* ENTER > > When you select only one pair of points, the selected objects move in 2D or 3D from the source point (1) to the destination point (2). > > **ALIGN Using Two Pairs of Points:** > > When you select two pairs of points, you can move, rotate, and scale the selected objects in 2D or 3D to align with other objects. > > The first set of source and destination points defines the base point for the alignment (1, 2). The second set of points defines the angle of rotation (3, 4). > > You are prompted to scale the object after you enter the second set of points. The distance between the first and second destination points (2, 4\) is used as the reference length to which the object is scaled. Scaling is available only when you are aligning objects using two pairs of points. > > **Note:** If you use two pairs of points to perform a 3D alignment on non-perpendicular working planes, you get unpredictable results. > > **ALIGN Using Three Pairs of Points:** > > When you select three pairs of points, you can move and rotate the selected objects in 3D to align with other objects. > > The selected objects move from the source point (1) to the destination point (2), and is rotated (1 and 3\) so that it aligns with the destination object (2 and 4). > > The selected object is then rotated again (3 and 5\) so that it aligns with the destination object (4 and 6). ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/A/ALIGN%20Command.md)