# Multiline Edit Tools Dialog Box
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [03 Dialog Boxes](%28Dialog%20Boxes%29.md)
Control the edit of multiline style, multiline intersection and etc.
## Command Access:
> **Command entry:** MLEDIT
## Dialog Box Description:
> **Closed Cross:** Create a closed-cross intersection between two multilines.
>
> > Select first mline: *Select the foreground multiline*
> >
> > Select second mline: *Select the intersecting multiline*
> >
> > The closed-cross intersection is completed and the following prompt is displayed:
> >
> > Select first mline or \[Undo\]: *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the closed-cross intersection.
>
> **Closed Tee:** Create a closed-tee intersection between two multilines. The first multiline is trimmed or extended to its intersection with the second multiline.
>
> > Select first mline: *Select the multiline to trim*
> >
> > Select second mline: *Select the intersecting multiline*
> >
> > The closed-tee intersection is completed, and the following prompt is displayed:
> >
> > Select first mline (or Undo): *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the closed-tee intersection.
>
> **Corner Joint:** Create a corner joint between multilines. The multilines are trimmed or extended to their intersection.
>
> > Select first mline: *Select the multiline to trim or extend*
> >
> > Select second mline: *Select the second half of the corner*
> >
> > The corner joint is completed, and the following prompt is displayed:
> >
> > Select first mline (or Undo): *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the corner joint.
>
> **Cut Single:** Create a visual break in a selected element of a multiline.
>
> > Select mline: *Select a multiline*
> >
> > The selection point on the multiline is used as the first cut point, and the following prompt is displayed:
> >
> > Select second point: *Specify the second cut point on the multiline*
> >
> > The element is cut, and the following prompt is displayed:
> >
> > Select mline or \[Undo\]: *Select another multiline or enter u*
> >
> > **Mline:** Edit another multiline.
> >
> > **Undo:** Undo the cut.
>
> **Open Cross:** Create an open-cross intersection between two multilines. Breaks are inserted in all elements of the first multiline and only the outside elements of the second multiline.
>
> > Select first mline: *Select a multiline*
> >
> > Select second mline: *Select the intersecting multiline*
> >
> > The open-cross intersection is completed, and the following prompt is displayed:
> >
> > Select first mline or \[Undo\]: *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the open-cross intersection.
>
> **Open Tee:** Create an open-tee intersection between two multilines. The first multiline is trimmed or extended to its intersection with the second multiline.
>
> > Select first mline: *Select the multiline to trim or extend*
> >
> > Select second mline: *Select the intersecting multiline*
> >
> > The open-tee intersection is completed, and the following prompt is displayed:
> >
> > Select first mline (or Undo): *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the open-tee intersection.
>
> **Add Vertex:** Add a vertex to a multiline.
>
> > Select mline: *Select a multiline*
> >
> > A vertex is added at the selected point, and the following prompt is displayed:
> >
> > Select mline or \[Undo\]: *Select another multiline or enter u*
> >
> > **Mline:** Edit another multiline.
> >
> > **Undo:** Remove the added vertex.
>
> **Cut All:** Create a visual break through the entire multiline.
>
> > Select mline: *Select a multiline*
> >
> > The selection point on the multiline is used as the first cut point, and the following prompt is displayed:
> >
> > Select second point: *Specify the second cut point on the multiline*
> >
> > All elements of the multiline are cut, and the following prompt is displayed:
> >
> > Select mline or \[Undo\]: *Select another multiline or enter u*
> >
> > **Mline:** Edits another multiline.
> >
> > **Undo:** Undo the cut.
>
> **Merged Cross:** Create a merged-cross intersection between two multilines. The order in which you select the multilines is not important.
>
> > Select first mline: *Select a multiline*
> >
> > Select second mline: *Select the intersecting multiline*
> >
> > The merged-cross intersection is completed, and the following prompt is displayed:
> >
> > Select first mline or \[Undo\]: *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the merged-cross intersection.
>
> **Merged Tee:**Create a merged-tee intersection between two multilines. The multiline is trimmed or extended to its intersection with the other multiline.
>
> > Select first mline: *Select the multiline to trim or extend*
> >
> > Select second mline: *Select the intersecting multiline*
> >
> > The merged-tee intersection is completed, and the following prompt is displayed:
> >
> > Select first mline (or Undo): *Select another multiline or enter u*
> >
> > **First Mline:** Edit another multiline.
> >
> > **Undo:** Undo the merged-tee intersection.
>
> **Delete Vertex:** Delete a vertex from a multiline.
>
> **Weld All:** Rejoin multiline segments that have been cut.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/03%20Dialog%20Boxes/Multiline%20Edit%20Tools%20Dialog%20Box.md)