# "Geometric Tolerance" Dialog Box [GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [03 Dialog Boxes](%28Dialog%20Boxes%29.md) ## Function Description: > Specify the symbol and value for a feature control frame. **Menu:** > Dimension\>Tolerance **Command Entry:** > TOLERANCE **Dialog Box Description: \\** > **Tolerance 1** > > Create the first tolerance value in the feature control frame. The tolerance value indicates the amount by which the geometric characteristic can deviate from a perfect form. You can insert a diameter symbol before the tolerance value and a material condition symbol after it. > > **First Box** > > Insert a diameter symbol in front of the tolerance value. Click the box to insert the diameter symbol > > **Second Box** > > Create the tolerance value. Enter a value in the box. > > Third Box > > Display the Material Condition list in which you select a modifying symbol. These symbols act as modifiers to the geometric characteristic and the tolerance value of features that can vary in size. > > **M material condition symbol** > > Maximum material condition, the most dimension features are contained in MMC. > > **L material condition symbol** > > Lowest material condition,the lowestt dimension features are contained in LMC. > > **S material condition symbol** > > RFS means this feature can be any size in the > material condition limit. > > **Tolerance 2** > > Create the second tolerance value in the feature control frame. Specify the second tolerance value in the same way as the first. > > Create the primary datum reference in the feature control frame. The datum reference can consist of a value and a modifying symbol. A datum is a theoretically exact geometric reference used to establish the tolerance zone for a featureDatum 1 > > **Datum 1** > > Create the primary datum reference in the feature control frame. The datum reference can consist of a value and a modifying symbol. A datum is a theoretically exact geometric reference used to establish the tolerance zone for a feature. > > **First Box** > > Create the datum reference value. Enter a value in the box. > > **Second Box** > > Display the Material Condition list in which you select a modifying symbol. These symbols act as modifiers to the datum reference. > > **Datum 2** > > Create the secondary datum reference in the feature control frame in the same way as the primary datum reference. > > **Datum 3** > > Create the tertiary datum reference in the feature control frame in the same way as the primary datum reference. > > **Height** > > Create a projected tolerance zone value in the feature control frame. A projected tolerance zone controls the variation in height of the extended portion of a fixed perpendicular part and refines the tolerance to that specified by positional tolerances. Enter a value in the box. > > **Projected Tolerance Zone** > > Insert a projected tolerance zone symbol after the projected tolerance zone value. > > **Datum Identifier** > > Create a datum-identifying symbol consisting of a reference letter. A datum is a theoretically exact geometric reference from which you can establish the location and tolerance zones of other features. A point, line, plane, cylinder, or other geometry can serve as a datum. Enter the letter in the box. ## Other versions with matching text [GstarCAD 8 (2013–2014)](../../../2013/Commands/03%20Dialog%20Boxes/Geometric%20Tolerance-%20Dialog%20Box.md)