# "Array"Dialog Box
[GstarCAD 2015](../../Index.md) → [Commands](../%28Commands%29.md) → [03 Dialog Boxes](%28Dialog%20Boxes%29.md)
Create multiple copies of objects in a pattern. Use the Rectangular Array option to create an array of rows and columns of copies of the selected object. Use the Polar Array option to create an array by copying the selected objects around a center point.
## Dialog Box Description:
> Select Objects:
>
> Specify the objects used to construct the array. You can select objects before or after the Array dialog box is displayed. To select objects when the Array dialog box is displayed, choose Select Objects. The dialog box temporarily closes. When you finish selecting objects, press ENTER. The Array dialog box is redisplayed, and the number of objects selected is shown below the Select Objects button.
>
> **Preview Area:**
>
> Show a preview image of the array based on the current settings in the dialog box. The preview image is dynamically updated when you move to another field after changing a setting.
>
> **Rectangular Array:**
>
> > Create an array of rows and columns of copies of the selected object.
> >
> > **Rows:** Specify the number of rows in the array.
> >
> > **Columns:** Specify the number of columns in the array.
> >
> > **Row Offset:** Specify the distance (in units) between rows. To add rows downward, specify a negative value. To specify row spacing with the pointing device, use the Pick Both Offsets button or the Pick Row Offset button.
> >
> > **Column Offset:** Specify the distance (in units) between columns. To add columns to the left, specify a negative value. To specify column spacing with the pointing device, use the Pick Both Offsets button or the Pick Column Offset button.
> >
> > **Angle of Array:** Specify the angle of rotation. This angle is normally 0, so the rows and columns are orthogonal with respect to the *X* and *Y* drawing axes of the current UCS. You can change the measurement conventions for angles using UNITS. TheANGBASE and ANGDIR system variables affect the angle of arrays.
>
> Polar Array:
>
> > Create an array by copying the selected objects around a specified center point
> >
> > **Center Point:** Specify the center point of the polar array. Enter coordinate values for*X* and *Y*, or choose Pick Center Point to use the pointing device to specify the location
> >
> > **Method and Values:** Specify the method and values used to position objects in the polar array.
> >
> > **Total Number of Items:** Set the number of objects that appear in the resultant array. The default value is 4\.
> >
> > **Angle Between Items:** Set the included angle between the base points of the arrayed objects and the center of the array. Enter a positive value. The default direction value is 90\.
> >
> > **Rotate Items as Copied:** Rotate the items in the array, as shown in the preview area.
>
> **Object Base Point:**
>
> Specify a new reference (base) point relative to the selected objects that will remain at a constant distance from the center point of the array as the objects are arrayed. To construct a polar array, ARRAY determines the distance from the array's center point to a reference (base) point on the last object selected. The point used depends on the type of object, as shown in the following table.
>
> **Preview:**
>
> Close the Array dialog box and display the array in the current drawing.
## Other versions with matching text
[GstarCAD 8 (2013–2014)](../../../2013/Commands/03%20Dialog%20Boxes/Array-Dialog%20Box.md)