# Define Hatch Boundaries
[GstarCAD 2012](../../Index.md) → [User Guide](../%28User%20Guide%29.md) → [Hatches、Fills](%28Hatches%E3%80%81Fills%29.md)
You create a hatch by selecting an object to hatch or fill, or by defining a boundary and then specifying an internal point.
**Overview of Hatch Boundaries**
You can hatch an enclosed area or hatch within a specified boundary using HATCH.By default, HATCH creates associative hatches that are updated when the boundary is changed.
You create a hatch by selecting an object to hatch or by defining a boundary and then specifying an internal point. A hatch boundary can be any combination of objects, such as lines, arcs, circles, and polylines, that forms an enclosed area.
Enclosed areas within the hatch area are referred to as islands. You can hatch them or leave them unhatched depending on the Islands setting in the Hatch and Gradient dialog box.
If you are hatching a small area in a complex drawing, you can use boundary sets to speed the process.
Objects can be hatched only if they are in a plane parallel to the *XY* plane of the current UCS.
**Control the Hatching in Islands**
You can determine how enclosed areas within hatch boundaries, called *islands*, are hatched.
You can determine how *islands*, enclosed areas within the hatch boundary, are hatched using the three hatching styles: Normal, Outer, and Ignore. You can preview these hatching styles in the More Options area of the Hatch and Gradient dialog box.
Normal hatching style (the default) hatches inward from the outer boundary. If the hatching process encounters an internal boundary, hatching is turned off until another boundary is encountered.
If you hatch using the Normal hatching style, islands remain unhatched and islands within islands are hatched, as shown below.

Outer hatching style hatches inward from the outer boundary and stops at the next boundary.
Ignore hatching style hatches the entire enclosed area, ignoring internal boundaries.

You can also remove any islands from the hatch area.

**Define Hatch Boundaries in Large Drawings**
You can save time hatching a small area in a complex drawing by defining a set of objects in the drawing to be used in determining the hatch boundary.
By default, HATCH defines the boundary by analyzing all closed objects in the drawing. Analysis of all objects fully or partially visible on the screen as boundaries can be time consuming in a complex drawing. To hatch a small area of a complex drawing, you can define a set of objects in the drawing called a *boundary set*. HATCH does not analyze objects that are not included in the boundary set.
For clarity, first zoom into the area you want to hatch.

The View Selections option in the Hatch and Gradient dialog box, highlights the objects in the drawing that define the boundary.
**Create Unbounded Hatches**
There are several methods you can use to create a hatch that does not display a hatch boundary.
- You can create a hatch with HATCH,and then erase some or all of the boundary objects.
- You can create a hatch with HATCH,making sure that the boundary objects are on a different layer than the hatch. Then turn off or freeze the layer of the boundary objects. This is the only method that maintains hatch associativity.
- You can trim an existing hatch with objects created as trim boundaries. After trimming the hatch, erase the objects.
- You can define a hatch boundary with the Draw option of -HATCH at the command prompt by specifying boundary points.
For example, you might want to show that a large area of a drawing is filled with a pattern by filling only a small section of that area, as shown in the following illustration.

You can choose whether to retain the polyline boundary after the hatch is created; here, the polyline boundary is not retained.
---
## Other versions with matching text
[GstarCAD 2011](../../../2011/User%20Guide/Hatches%E3%80%81Fills/Define%20Hatch%20Boundaries.md)