# Add Bias [GstarCAD 2012](../../../Index.md) → [User Guide](../../%28User%20Guide%29.md) → [Express tool](../%28Express%20tool%29.md) → [Table Tools](%28Table%20Tools%29.md) ## Add Bias This function can add bias for cell. Click the start point and end point according to the prompts, our system provides intersection snap, can easily find the start point and end point of bias. There is another simple way to operate, when system prompts to select the start point, you can click any area in one cell and system will find the top left point of the cell automatically, then the system will prompt you to select the end point, you can also click any area in the cell, system will take the bottom right point as the end point automatically, this way, a bias is added in a cell. **Menu:** Express\>Table Tools\>Add Bias **Command Entry:** BGX ## Operation steps: 1. Start the command. 2. Specify start point for bias, you can click the top left point and also you can click the blank area in the cell. ![](../../../assets/ICAD_IUG/images/Add%20Bias%201.jpg) 3. Specify end point for bias. Then you will finish drawing the bias, as shown below. ![](../../../assets/ICAD_IUG/images/Add%20Bias%202.jpg) --- Suzhou Gstarsoft Co., Ltd