# Spline to Line
[GstarCAD 2012](../../../Index.md) → [User Guide](../../%28User%20Guide%29.md) → [Express tool](../%28Express%20tool%29.md) → [Draw](%28Draw%29.md)
## Spline to Line
Converts spline(s) to numbers of straight lines.
**Menu:** Express tools\>Draw\> Spline to Line
**Command Entry:** SPLINE2LINE
Once start the command, the command line prompts as follow:
Select spline or \[Set parameters(S)\]: Select spline(s) or input “S” to set parameters
\[The line precision/Starting point (S)\<1.00\>\]: Input a new value major than 0 to joining precision between segment lines
Conversion in a straight line to allow the greatest number of \<5000\>\]: Input a new value less than 5000 to numbers of lines
At first, system will fit the spline with a segment line which precision(Length) has been specified, if the line’s number needed is more than maximum number and system will extend the length of the lines by force, using the maximum number lines to fit the spline.
Select spline or \[Set parameters(S)\]: Then select the spline(s) to be converted and press Enter to finish the operation



---
Suzhou Gstarsoft Co., Ltd