# Cloud Line
[GstarCAD 2012](../../../Index.md) → [User Guide](../../%28User%20Guide%29.md) → [Express tool](../%28Express%20tool%29.md) → [Draw](%28Draw%29.md)
## Cloud Line
Creates polyline objects comprised of arcs that resemble cloud lines.
**Menu:** Express tools\>Draw\>Cloud Line
**Command Entry:** REVCLOUD
Once start the command, the command line prompts as follow:
Minimum arc length:Current Maximum arc length: Current Style: Normal
Specify start point or \[Arc length/Object/Style\]\<Object\>: Specify a point or enter an option or press ENTER
**Starting point:** Specifies the starting point of the cloud lines.
Guide crosshairs along cloud path...
Once the first arc links to the last arc, the prompts are displayed as follow:
Reverse direction \[Yes (Y)/No (N)\]: By inputting “Y”, all the arcs will change into inverse position. By inputting “N”, the arcs will keep the current position.

**Arc:** Specifies the arc length.
Specify minimum length of arc \<current\>: Specify the arc length value or press ENTER
Specify the maximum arc length \<current\>: Specify the arc length value or press ENTER
Then specify start and end point to finish the operation.

Note: The maximum arc length should not be greater than 3 times the minimum arc length. The value of arc length is stored in the register.
**Object:** Converts the closed object to the cloud lines. It can be only applied to the closed object.

Select objects: Select a closed object(s)
Reverse direction \[Yes (Y)/No (N)\]: By inputting “Y”, all the arcs will change into inverse position. By inputting “N”, the arcs will keep the current position. Select any option and press Enter to finish the operation.

**Style:** There are two styles: Normal (as same as above) and Calligraphy that makes the arcs of the cloud thicker than the normal one.
Select arc style \[Normal/Calligraphy\]\<Normal\>: Select Calligraphic
*Reverse direction \[Yes (Y)/No (N)\]:* By inputting “Y”, all the arcs will change into inverse position. By inputting “N”, the arcs will keep the current position. Select any option and press Enter to finish the operation.

---
Suzhou Gstarsoft Co., Ltd