# Create Linear Dimensions
[GstarCAD 2012](../../../Index.md) → [User Guide](../../%28User%20Guide%29.md) → [Dimensions](../%28Dimensions%29.md) → [Create Dimensions](%28Create%20Dimensions%29.md)
You can create linear dimensions with horizontal, vertical, and aligned dimension lines. These linear dimensions can also be stacked, or they can be created end to end.
**Overview of Creating Linear Dimensions**
Linear dimensions can be horizontal, vertical, or aligned. With aligned dimensions, the dimension line is parallel to the line (imaginary or real) between the extension line origins. Baseline (or parallel) and continued (or chain) dimensions are series of consecutive dimensions that are based on a linear dimension.
In all four illustrations, the extension line origins are designated explicitly at 1 and 2, respectively. The dimension line location is specified at 3\.

As you create linear dimensions, you can modify the content of the text, the angle of the text, or the angle of the dimension line.
**Create Horizontal and Vertical Dimensions**
You can create dimensions using only the horizontal or vertical components of the locations or objects that you specify.
The program automatically applies a horizontal or vertical dimension according to the extension line origins that you specify or the location where you select an object; however, you can override this as you create the dimension by specifying that a dimension be horizontal or vertical. For example, in the following illustration, a horizontal dimension is drawn by default unless you specify a vertical one.

**Create Aligned Dimensions**
You can create dimensions that are parallel to the locations or objects that you specify.
In aligned dimensions, the dimension line is parallel to the extension line origins. The illustration shows two examples of aligned dimensioning. The object is selected (1), and the location of the aligned dimension is specified (2). The extension lines are drawn automatically.

**Create Baseline and Continued Dimensions**
Baseline dimensions are multiple dimensions measured from the same baseline. Continued dimensions are multiple dimensions placed end to end.
You must create a linear, aligned, or angular dimension before you create baseline or continued dimensions. You create baseline dimensions incrementally from the most recently created dimension in the current session.

Both baseline and continued dimensions are measured from the previous extension line unless you specify another point as the point of origin.
**Create Rotated Dimensions**
In rotated dimensions, the dimension line is placed at an angle to the extension line origins. The illustration shows an example of a rotated dimension. In the example, the angle specified for dimension rotation is equal to the angle of the slot.

**Create Dimensions with Oblique Extension Lines**
You can create dimensions with extension lines that are not perpendicular to their dimension lines.
Extension lines are created perpendicular to the dimension line. However, if the extension lines conflict with other objects in a drawing, you can change their angle after the dimension has been drawn.
New dimensions are *not* affected when you make an existing dimension oblique.

---
## Other versions with matching text
[GstarCAD 2011](../../../../2011/User%20Guide/Dimensions/Create%20Dimensions/Create%20Linear%20Dimensions.md)