# SECTION Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md) **Function Description:** > Uses the intersection of a plane and solids to create a region **Command Entry:** > SECTION **Command Prompt:** > Select objects: Use an object selection method and press ENTER when you finish > > Specify first point on section plane or Object/Zaxis/View/XY/YZ/ZX: > > **First Point on Section Plane:**Use three points to define the sectioning plane. After you specify the first point, the following prompts are displayed: > > > Specify second point on plane: Specify a point > > > > Specify third point on plane: Specify a point > > **Object:** Align the sectioning plane with a circle, ellipse, circular or elliptical arc, 2D spline, or 2D polyline segment. > > > Select a circle, ellipse, arc, 2D-spline, or 2D-polyline: > > **Z Axis:** Define the sectioning plane by specifying a point on the sectioning plane and another point on the plane's > *Z* axis, or normal. > > > Specify a point on the section plane: > > > > Specify a point on the Z-axis (normal) of the plane: > > **View:** Align the sectioning plane with the current viewport's viewing plane. Specifying a point defines the location of the sectioning plane. > > > Specify a point on the current view plane \<0,0,0\>: > **XY:** Align the sectioning plane with the XY plane of the current UCS. Specifying a point defines the location of the sectioning plane > > > Specify a point on the XY-plane \<0,0,0\>: Specify a point (1) or press ENTER > > **YZ:** Align the sectioning plane with the > *YZ* plane of the current UCS. Specifying a point defines the location of the sectioning plane. > > > Specify a point on the YZ-plane \<0,0,0\>: Specify a point (1) or press ENTER > > **ZX:** Align the sectioning plane with the ZX plane of the current UCS. Specifying a point defines the location of the sectioning plane. > > > Specify a point on the ZX-plane \<0,0,0\>: Specify a point (1) or press ENTER ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/S/SECTION%20Command--2e4a410f31fd.md)