# SECTION Command
[GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [S](%28S%29.md)
## Function Description:
> Uses the intersection of a plane and solids to create a region
**Command Entry:**
> SECTION
**Command Prompt:**
> Select objects: Use an object selection method and press ENTER when you finish
>
> Specify first point on section plane or Object/Zaxis/View/XY/YZ/ZX:
>
> **First Point on Section Plane:**Use three points to define the sectioning plane. After you specify the first point, the following prompts are displayed:
>
> > Specify second point on plane: Specify a point
> >
> > Specify third point on plane: Specify a point
>
> **Object:** Align the sectioning plane with a circle, ellipse, circular or elliptical arc, 2D spline, or 2D polyline segment.
>
> > Select a circle, ellipse, arc, 2D-spline, or 2D-polyline:
>
> **Z Axis:** Define the sectioning plane by specifying a point on the sectioning plane and another point on the plane's
> *Z* axis, or normal.
>
> > Specify a point on the section plane:
> >
> > Specify a point on the Z-axis (normal) of the plane:
>
> **View:** Align the sectioning plane with the current viewport's viewing plane. Specifying a point defines the location of the sectioning plane.
>
> > Specify a point on the current view plane \<0,0,0\>:
> **XY:** Align the sectioning plane with the XY plane of the current UCS. Specifying a point defines the location of the sectioning plane
>
> > Specify a point on the XY-plane \<0,0,0\>: Specify a point (1) or press ENTER
>
> **YZ:** Align the sectioning plane with the
> *YZ* plane of the current UCS. Specifying a point defines the location of the sectioning plane.
>
> > Specify a point on the YZ-plane \<0,0,0\>: Specify a point (1) or press ENTER
>
> **ZX:** Align the sectioning plane with the ZX plane of the current UCS. Specifying a point defines the location of the sectioning plane.
>
> > Specify a point on the ZX-plane \<0,0,0\>: Specify a point (1) or press ENTER
## Other versions with matching text
[GstarCAD 2011](../../../2011/Commands/S/SECTION%20Command.md)