# REVOLVE Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [R](%28R%29.md) **Function Description:** > Create a 3D solid or surface by sweeping a 2D object around an axis **Menu**: > Draw\>Modeling\>Revolve **Command Entry:** > REVOLVE **Command Prompt:** > Select objects:Specify start point for axis of revolution or define axis by Object/Xaxis/Yaxis: > > **Start point for axis** > > Specifies the first and second points of the axis of revolution. The positive axis direction is from the first to the second point. > > Specify endpoint of axis: > > Specify angle of revolution \<360\>: > > **Object:** Allow you to select an existing object that defines the axis about which to revolve the selected object. The positive axis direction is from the closest to the farthest endpoint of this object. > > > Select line or planar polyline: > > > > Specify angle of revolution \<360\>: > > **X Axis:** Use the positive X axis of the current UCS as the positive axis direction. > > > Specify angle of revolution \<360\>:Specify an angle or press ENTER > > **Y Axis:** Use the positive Y axis of the current UCS as the positive axis direction. > > > Specify angle of revolution \<360\>:Specify an angle or press ENTER ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/R/REVOLVE%20Command--b017f763abf1.md)