# QDIM Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [Q](%28Q%29.md) **Function Description:** > Quickly creates a series of dimensions from selected objects **Menu:** > Dimension\>Quick Dimension **Command Entry:** > QDIM Command Prompt: > Select geometry to dimension: Select the objects you want to dimension or the dimensions you want to edit and press ENTER > > Specify dimension line location or \[Continuous/Staggered/Baseline/Ordinate/Radial/Diameter/datumPoint/Edit\] \<Continue\>: > > Enter an option or press ENTER > > **Specify Dimension Line Location** > > Drag cursor to specify dimension line location, create line dimension. > > Continuous(C) > > Create a series of continued dimensions. > > Staggered(S) > > Create a series of staggered dimensions. > > Baseline(B) > > Create a series of baseline dimensions. > > Ordinate(O) > > Create a series of ordinate dimensions. > > Radial(R) > > Create a series of radius dimensions. > > Diameter(D) > > Create a series of diameter dimensions. > > DatumPoint(P) > > Set a new datum point for baseline and ordinate dimensions. > > Select new datum point: Specify a point > > **Edit\]****(E)** > > Edit a series of dimensions. You are prompted to add or remove points from existing dimensions. > > Specify dimension point to remove, or \[Add/eXit\] \<eXit\>: Specify a point or enter an option or press ENTER ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/Q/QDIM%20Command--ae9bed9e7e47.md)