# PEDIT Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [P](%28P%29.md) **Function Description:** > Edit polylines and 3D polygon meshes **Menu:** > Modify\>Object\>Polyline **Command Entry:** > PEDIT **Command Prompt:** > Select polyline or \[Multiple\]: Select polyline or 3D mesh or enter m > > The remaining prompts depend on whether you have selected a 2D polyline, a 3D polyline, or 3D polyline mesh > > If the selected object is a line or an arc, the following prompt is displayed: > > Object selected is not a polyline. > > Do you want it to turn into one? \<Y\>: Enter y or n, or press ENTER > > **Multiple** > > Enable selection for more than one object. > > 2D Polyline > > If you select a 2D polyline, the following prompt is displayed: > > Edit polyline: \[Edit vertices/Close/Decurve/Fit/Join/Linetypemode/Reverse/Spline/Taper/Width/Undo\]\<eXit\>: Enter an option or press ENTER. > > If the polyline you select is a closed polyline, Open replaces the Close option in the prompt. You can edit a 2D polyline if its normal is parallel to and in the same direction as the > *Z* axis of the current UCS. > > **3D Mesh** > > Edit 3D mesh > > If you select a polygon mesh, the following prompt is displayed: > > Edit polyline: \[Edit vertices/Desmooth/Mclose/Nclose/Undo\]\<eXit\>: Enter an option or press ENTER. ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/P/PEDIT%20Command--dbf46fd3765f.md)