# MINSERT Command
[GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [M](%28M%29.md)
## Function Description:
> Insert multiple instances of a block in a rectangular array.
**Command Entry:**
> MINSERT
Command Prompt:
> Enter block name or \[?\]: Enter a name, enter ? to list the currently defined blocks in the drawing, or enter \~ to display the Insert Block Dialog Box.
>
> In this Dialog Box you can specify the file to insert block, the following Command prompts are displayed:
>
> Insertion point for block: Specify base point
>
> Corner/XYZ/X scale factor \<1.000000\>: Enter value, options or press ENTER.
>
> **X Scale Factor**
>
> Sets X and Y scale factors.
>
> Enter Y scale factor \<use X scale factor\>: Enter a value or press ENTER to use the same scale factor
>
> Specify rotation angle \<0\>:
>
> The rotation angle sets the angle of the individual block inserts and also sets the angle of the entire array.
>
> Enter number of rows (---) \<1\>: Enter a positive value
>
> Enter number of columns (\| \| \|) \<1\>: Enter a positive value
>
> If you specify more than one row, the following prompt is displayed:
>
> Enter distance between rows or specify unit cell (---): Enter a value, or specify two points to define a box whose width and height represent the distance between rows and between columns.
>
> If you specify more than one column and no unit cell, the following prompt is displayed:
>
> Specify distance between columns ( \| \| \| ): Enter a value or specify a distance .
>
> **XYZ**
>
> Set X, Y, and *Z* scale factors.
>
> Specify X scale factor or \[Corner\] \<1\>: Enter a value or press ENTER to use the same scale factor.
>
> If you enter c, you specify a corner point. The specified point and the block insertion point determine the *X* and *Y* scale factors.
>
> Specify Y scale factor or \<use X scale factor\>: Enter a value or press ENTER to use the same scale factor.
>
> Enter Z scale factor \<use X scale factor\>: Enter a value or press ENTER to use the same scale factor.
>
> Specify rotation angle \<0\>:
>
> The rotation angle sets the angle of the individual block inserts and also sets the angle of the entire array.
>
> Enter number of rows (---) \<1\>: Enter a positive value
>
> Enter number of columns (\| \| \|) \<1\>: Enter a positive value
>
> If you specify more than one row, the following prompt is displayed:
>
> Enter distance between rows or specify unit cell (---): Enter a value, or specify two points to define a box whose width and height represent the distance between rows and between columns
>
> If you specify more than one column and no unit cell, the following prompt is displayed:
>
> Specify distance between columns ( \| \| \| ): Enter a value or specify a distance .
>
> **Corner**
>
> Set the scale factor by using the block insertion point and the opposite corner.
## Other versions with matching text
[GstarCAD 2011](../../../2011/Commands/M/MINSERT%20Command.md)