# MEASURE Command
[GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [M](%28M%29.md)
**Function Description:**
> Place point objects or blocks at measured intervals on an object
Menu:
> Draw\>Point\>Measure
**Command Entry:**
> MEASURE
**Command Prompt:**
> Select objects to measure: Select an object
>
> \[Block/Segment length\]\<Segment length\>: Specify a distance or enter b
>
> **Length of Segment**:
>
> Place point objects at the specified interval along the selected object, starting at the endpoint closest to the point you used to select the object.
>
> Measurement of closed polylines starts at their initial vertex (the first one drawn).
>
> Measurement of circles starts at the angle from the center set as the current snap rotation angle. If the snap rotation angle is 0, then the measurement of the circle starts to the right of center, on its circumference.
> **Block**
>
> Place blocks at a specified interval along the selected object.
>
> \[? to list blocks in drawing/Block to insert\]\<Block to insert\>: Enter block name or enter ?
>
> Block to Insert
>
> Specify block as mark, place blocks at a specified interval along the selected object.
>
> Align blocks with entity? \<Y\>:Enter Y or N, or press ENTER
>
> If you enter y, the block is rotated about its insertion point so that its horizontal lines are aligned with, and drawn tangent to, the object being measured. If you enter n, the block is always inserted with a 0 rotation angle.
>
> **Segment Length:**
>
> After you specify the segment length, the block is inserted at the specified interval. If the block has variable attributes, these attributes are not included.
## Other versions with matching text
[GstarCAD 2011](../../../2011/Commands/M/MEASURE%20Command--c940f5c080b7.md)