# EXTRUDE Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [E](%28E%29.md) **Function Description:** > Create a 3D solid or surface by extruding a 2D object **Menu:** > Draw\>Modeling\>Extrude **Command Entry:** > EXTRUDE **Command Prompt:** Select objects to extrude: Specify height of extrusion or Path: *Specify a distance or enter p* **Object Selection:** Specify the objects to extrude. You can extrude the following objects and sub-objects: - Lines - Arcs - Elliptical arcs - 2D polylines - 2D splines - Circles - Ellipses - 2D solids - Traces - Regions - Planar 3D polylines - Planar 3D faces - Planar surfaces - Planar faces on solids **Height of Extrusion:** Extrude objects along the positive *Z* axis of the object's coordinate system if you enter a positive value. If you enter a negative value, the objects are extruded along the negative *Z* axis. Objects do not have to be parallel to the same plane. If all the objects are on a common plane, the objects are extruded in the direction of the normal of the plane. By default, planar objects are extruded in the direction of the object's normal. **Path:** Select the extrusion path based on a specified object. The path is moved to the centroid of the profile. Then the profile of the selected object is extruded along the chosen path to create solids or surfaces. ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/E/EXTRUDE%20Command--f78919217670.md)