# EXTRUDE Command
[GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [E](%28E%29.md)
## Function Description:
> Create a 3D solid or surface by extruding a 2D object
**Menu:**
> Draw\>Modeling\>Extrude
**Command Entry:**
> EXTRUDE
**Command Prompt:**
Select objects to extrude:
Specify height of extrusion or Path: *Specify a distance or enter p*
**Object Selection:** Specify the objects to extrude. You can extrude the following objects and sub-objects:
- Lines
- Arcs
- Elliptical arcs
- 2D polylines
- 2D splines
- Circles
- Ellipses
- 2D solids
- Traces
- Regions
- Planar 3D polylines
- Planar 3D faces
- Planar surfaces
- Planar faces on solids
**Height of Extrusion:** Extrude objects along the positive *Z* axis of the object's coordinate system if you enter a positive value. If you enter a negative value, the objects are extruded along the negative *Z* axis. Objects do not have to be parallel to the same plane. If all the objects are on a common plane, the objects are extruded in the direction of the normal of the plane.
By default, planar objects are extruded in the direction of the object's normal.
**Path:** Select the extrusion path based on a specified object. The path is moved to the centroid of the profile. Then the profile of the selected object is extruded along the chosen path to create solids or surfaces.
## Other versions with matching text
[GstarCAD 2011](../../../2011/Commands/E/EXTRUDE%20Command.md)