# DONUT Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [D](%28D%29.md) ## Function Description: > Create filled circles and rings **Menu:** > Draw\>Donut **Command Entry:** > DONUT **Command Prompt:** > \[2Point/3Point/RadTanTan\]\<Inside diameter of donut\> \<0.5000\>: > > **Inside Diameter of Donut:** > Specify the first point of the inside diameter of the donut, or enter the diameter. If you specify a point, you are prompted to specify a second point. To draw a filled circle, enter 0 (zero) for the inside diameter. > > **Outside Diameter of Donut \<Value\>:** Specify the first point of the outside diameter of the donut, or enter the diameter. If you specify a point, you are prompted to specify a second point. > > **Center of Donut:** Enter the center point to place the donut. The prompt repeats, and you can continue to draw donuts until you choose Done or press Enter. > > **2Point:** Enter the width of the donut,and specify two points of the diameter of the donut > > **3Points:** Enter the width of the donut,and specify three points on the donut > > **RadTanTan:** To draw a donut by specifying the radius and two tangential entities ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/D/DONUT%20Command.md)