# DIMALIGNED Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [D](%28D%29.md) ## Function Description: > Create an aligned linear dimension **Menu:** > Dimension\>Align **Command Entry:** > DIMALIGNED **Command Prompt:** > Specify first extension line origin or \<select object\>: > > **The First Extension Line Origin:** > > Specify first extension line origin or \<select object\>: > *Specify a point for manual extension lines, or press* ENTER *for automatic extension lines* > > After you specify either manual or automatic extension lines, the following prompt is displayed: > > Specify dimension line location or \[Mtext/Text/Angle\]: *Specify a point or enter an option* > > Create a linear dimension that is aligned with the origin points of the extension lines. > > **Object Selection:** > > Automatically determine the origin points of the first and second extension lines after you select an object. > > For polylines and other explodable objects, only the individual line and arc segments are dimensioned. You cannot select objects in a non-uniformly scaled block reference. > > If you select a line or an arc, its endpoints are used as the origins of the extension lines. The extension lines are offset from the endpoints by the distance specified in Offset from Origin on the Lines and Arrows tab of the New, Modify, and Override Dimension Style Dialog Boxes > > If you select a circle, the endpoints of its diameter are used as the origins of the extension line. The point used to select the circle defines the origin of the first extension line. > > **MText:** > > Display MText Editor, dimension text can be edited > > **Text:** > > Customize the dimension text at the Command prompt. The generated dimension measurement is displayed within angle brackets. > > **Angle:** > > Changes the angle of the dimension text. ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/D/DIMALIGNED%20Command.md)