# CHAMFER Command [GstarCAD 2012](../../Index.md) → [Commands](../%28Commands%29.md) → [C](%28C%29.md) ## Function Description: > Bevel the edges of objects **Menu:** > Modify\>Chamfer **Command Entry:** > CHAMFER **Command Prompt:** > Chamfer dist1\=0.0000, dist2\=0.0000: \[Distance/Angle/Trim/mEthod/Polyline/Multiple\] \<Select first entity\>: > > **Distance:** > > Set the distance of the chamfer from the endpoint of the selected edge. > > Polyline: > > Chamfer an entire 2D polyline. > > Select First Entity: > > Specify the first of two edges required to define a 2D chamfer, or the edge of a 3D solid to chamfer. > > If you select lines or polylines, their lengths adjust to accommodate the chamfer line. You can hold down SHIFT while selecting the objects to override the current chamfer distances with a value of 0\. > > If the selected objects are line segments of a 2D polyline, they must be adjacent or separated by no more than one segment. If they're separated by another polyline segment, CHAMFER deletes the segment that separates them and replaces it with the chamfer. > > If you select an edge on a 3D solid, you must indicate which one of the two surfaces adjacent to the edge is the base surface. ## Other versions with matching text [GstarCAD 2011](../../../2011/Commands/C/CHAMFER%20Command.md)