# Plot Settings
[GstarCAD 2011](../../../Index.md) → [User Guide](../../%28User%20Guide%29.md) → [Plot and Publish Drawings](../%28Plot%20and%20Publish%20Drawings%29.md) → [Plot Drawings](%28Plot%20Drawings%29.md)
User can set the relative properties such as:paper size、drawing orientation、plot scale、plot area before printing.
**Set Paper Size**
In the Plot dialog box, select the paper size that you want to use.
If you plot from a layout, you may have already specified a paper size in the Page Setup dialog box. However, if you plot from the Model tab, you need to specify a paper size when you plot. In the Plot dialog box, select the paper size that you want to use. The list of paper sizes depends on the printer or plotter that you have selected in either the Plot or Page Setup dialog box. The list of available plotters includes all those that are currently configured for use with Windows and those for which you have installed non-system drivers.
You can also set the default page size used to create new layouts for most plotters by editing the PC3 file associated with that plotter. For Windows system printers, you can use this technique to specify different default page sizes for Windows and for this program.
**Use a Custom Paper Size**
If you need to specify a paper size that is not listed in either the Plot dialog box or the Page Setup dialog box, you can add a custom paper size for a non-system plotter using the Plotter Configuration Editor. Typically, you cannot add a custom paper size to Windows system printers because the allowable page sizes and printable areas are determined by the manufacturer. However, you can modify the printable area for paper sizes associated with a Windows system printer.
**Specify Plotted Position**
The position of printable drawing on the paper can be changed before being plotted.
**Specify Paper Size**
Paper size is determined by specified plotter and drawing size.
**Set Plot Offset**
The settings in the Plot Offset area of the Plot dialog box specify an offset of the plot area relative to the lower-left corner (the origin) of the printable area or the edge of the paper, depending on the setting made in the Specify Plot Offset Relative To option (Options dialog box, Plot and Publish tab). The Plot Offset area of the Plot dialog box displays the specified plot offset option in parentheses.
You can offset the drawing on the paper by entering positive or negative values in the X and Y offset boxes. However, this may result in the plot area being clipped. If the Plot Area is not set to Layout (Extents, Display, View, or Window), you can also select the Center the Plot option.
**Set Drawing Orientation**
The drawing orientation determines whether the position of the plotted drawing is landscape (the longer edge of the drawing is horizontal) or portrait (the longer edge of the drawing is vertical). This is based on the size of paper selected. You can also choose to plot upside down.
**Set Plot Scale**
When you specify a scale to output your drawing, you can choose from a list of real-world scales, enter your own scale, or select Fit to Paper to scale the drawing to fit onto the selected paper size.
Usually, you draw objects at their actual size. That is, you decide how to interpret the size of a unit (an inch, a millimeter, a meter) and draw on a 1:1 scale.
**Set a Specific Scale**
When you plot, the paper size you select determines the unit type, inches or millimeters. For example, if the paper size is in mm, entering *1* under mm and *10* under Units produces a plotted drawing in which each plotted millimeter represents 10 actual millimeters.
**Fit to Paper**
When you review drafts, a precise scale is not always important. You can use the Fit to Paper option to plot the view at the largest possible size that fits the paper. The height or width of the drawing is fit to the corresponding height or width of the paper.
When you plot a perspective view from model space, the view is scaled to fit the paper even when you enter a scale.
When you select the Fit to Paper option, the text boxes change to reflect the ratio of plotted units to drawing units. This scale is updated whenever you change the paper size, plotter, plot origin, orientation, or size of the plotted area in the Plot dialog box.
**Set Options for Plotted Objects**
The following plotted options can affect how objects are plotted.
*Plot Object Lineweights:* Specifies that lineweights assigned to objects and layers are plotted.
*Plot with Plot Styles:* Specifies that the drawing is plotted using plot styles. Selecting this option automatically plots lineweights. If you do not select this option, objects are plotted with their assigned properties and not with the plot style overrides.
*Shaded Viewport Plotting:* Specifies shaded plotting options: As Displayed, Wireframe, or Hidden. The effect of this setting is reflected in the plot preview, but not in the layout.
*Save Changes to Layout:* Saves changes you make in the Plot dialog box to the layout if you click OK.
**Specify the Area to Plot**
When plotting a drawing, you must specify the area of the drawing to plot. The Plot dialog box provides the following options under Plot Area.
- *Display*. Plots the view in the current viewport in the Model tab or the current paper space view in a layout tab.
- *Window.* Plots any portion of the drawing you specify. Click the Window button to use a pointing device to specify opposite corners of the area to be plotted, or enter coordinate values.
**Preview**
You can preview the drawing from the Plot dialog box. The preview shows exactly how the drawing will look when plotted, including lineweights, fill patterns, and other plot style options.
When you preview your drawing, the active toolbars and tool palettes are hidden and a temporary Preview toolbar is displayed that provides buttons to plot, pan, and zoom the drawing.
In the Plot and Page Setup dialog boxes, a thumbnail preview is also displayed, which shows the printable area and the position of the drawing on the page.
---