# Layout Settings [GstarCAD 2011](../../Index.md) → [User Guide](../%28User%20Guide%29.md) → [Plot and Publish Drawings](%28Plot%20and%20Publish%20Drawings%29.md) Layout can simulate the display of paper and provides the intuitionistic plot setting.. **Select a Paper Size for a Layout** You can select a paper size from a standard list. The paper sizes available in the list are determined by the plot device that is currently selected for the layout. If your plotter is configured for raster output, you must specify the output size in pixels. You can add custom paper sizes, which are stored in the plotter configuration (PC3) file, using the Plotter Configuration Editor. If you are using a system printer, the paper size is determined by the document defaults that are set in the Windows Control Panel. If you change the paper size, the new paper size is saved with the layout and overrides the size saved in the plotter configuration (PC3) file. **Set the Plot Area of a Layout** You can specify the plot area to determine what will be included in the plot. When you prepare to plot from the Model tab or a layout tab, you can specify the plot area to determine what will be included in the plot. When you create a new layout, the default Plot Area option is Layout. Layout plots all objects within the printable area of the specified paper size. The Display Plot Area option plots all the objects displayed in the drawing. The Extents Plot Area option plots all the visible objects in the drawing. The View Plot Area option plots a saved view. You can use the Window Plot Area option to define an area to be plotted. **Adjust the Plot Offset of a Layout** The printable area of a drawing sheet is defined by the selected output device and is represented by the dashed line in a layout. When you change the output device, the printable area may change. The plot offset specifies an offset of the plot area relative to the lower-left corner (the origin) of the printable area or the edge of the paper, depending on the Specify Plot Offset Relative To option specified in the Options dialog box, Plot and Publish tab. The Plot Offset area of the Plot dialog box displays the specified plot offset option in parentheses. You can offset the geometry on the paper by entering a positive or negative value in the X and Y Offset boxes. However, this may result in the plot area being clipped. If you choose to plot an area other than the entire layout, you can also center the plot on the sheet of paper. ![](../../assets/ICAD_IUG/ICAD_IUG/untitled.jpg5) **Set the Plot Scale for a Layout** When you plot a drawing layout, you can either specify a precise scale for the layout or fit the image to the paper. Normally, you plot a layout at a 1:1 scale. To specify a different scale for the layout, set the plot scale for the layout in the Page Setup or the Plot dialog box. In those dialog boxes, you can select a scale from a list or enter a scale. **Determine the Drawing Orientation of a Layout** You can specify the orientation of the drawing on the paper using the Landscape and Portrait settings. Landscape orients the drawing on the paper so that the long edge of the paper is horizontal, and Portrait orients the paper so that the short edge is horizontal. Changing the orientation creates the effect of rotating the paper underneath the drawing. In either landscape or portrait orientation, you can select Plot Upside-Down to control whether the top or bottom of the drawing is plotted first. Although you can specify the drawing orientation in both the Page Setup dialog box and the Plot dialog box, the Page Setup settings are always saved and reflected in the layout. In the Plot dialog box, you can override the page setup settings for a single plot; however, the settings you apply are not saved in the layout. To save the settings you apply using the Plot dialog box, click the Apply to Layout button in the Plot dialog box. If you change the drawing orientation, the layout origin remains in the lower-left corner of the rotated page. **Set the Lineweight Scale for a Layout** You can scale lineweights proportionately in a layout with the plot scale. Typically, lineweights specify the line width of plotted objects and are plotted with the line width size regardless of the plot scale. Most often, you use the default plot scale of 1:1 when plotting a layout. However, if you want to plot an E-size layout that is scaled to fit on an A-size sheet of paper, for example, you can specify lineweights to be scaled in proportion to the new plot scale. --- ## Other versions with matching text [GstarCAD 2012](../../../2012/User%20Guide/Plot%20and%20Publish%20Drawings/Layout%20Settings.md)