# INTERFERE Command
[GstarCAD 2011](../../Index.md) → [Commands](../%28Commands%29.md) → [I](%28I%29.md)
## Function Description:
> Highlight 3D solids that overlap
Command Entry:
> INTERFERE
Command Prompt:
> Select first set of ACIS objects: Select solid entity
>
> You can select several solid entities as first set of ACIS objects until press Enter to end
>
> Select second set of ACIS objects:
>
> INTERFERE
>
> Highlight 3D solids that overlap by creating a temporary composite 3D solid from the common volume of two or more solids. If you define a single selection set, INTERFERE checks all the solids in the set against one another. If you define two selection sets, INTERFERE checks the solids in the first selection set against those in the second selection set. If you include the same 3D solid in both selection sets, INTERFERE considers the 3D solid part of the first selection set and ignores it in the second selection set.
>
> Select second set of objects or press ENTER to check for interferences, INTERFERE highlights all interfering 3D solids and displays the number of objects selected and the number of interfering pairs.
>
> Create interference objects? Yes(Y)/\< Not(N)\>: input Y or N, or press ENTER key
>
> Enter y to create and highlight new 3D solids on the current layer that are the intersections of the interfering pairs of 3D solids.
>
> If there are more than two interfering 3D solids, all the interfering 3D objects are highlighted in order to see the interfering intersected solid, the following Command prompt is displayed:
>
> are highlighted all the interfering objects Yes(Y)/\< Not(N)\>: input Y or N, or press ENTER key
>
> If there is more than one interfering pair, the following prompt is displayed::
>
> Input options: \<Next pair (N)\>/eXit(X): input X or N,or press ENTER key
>
> Input N or press ENTER key, entering n or pressing ENTER cycles through the interfering pairs of 3D solids. Entering x ends the Command.
## Other versions with matching text
[GstarCAD 2012](../../../2012/Commands/I/INTERFERE%20Command.md)