# HATCH Command [GstarCAD 2011](../../Index.md) → [Commands](../%28Commands%29.md) → [H](%28H%29.md) ## Function Description: > Hatch the closed objects with unassociative patterns. > > Hatch boundary can be composed of one or more closed area. "direct hactch" can define polyline hatch which can hatch unclosed boundary. "pattern hatch" can be saved as single hatch object. > > Auto update will not work when using hatch Command. In general, the line which composes hatch pattern will become block after using hatch Command > (except the special). > > hatch and associative hatch can be created in Dialog Box with BHATCH Command. Command Entry > **HATCH** **Command Prompt:** > Hatch: \[list patterns/SEttings(?)/for lines(\&)/Preview/STyle\]\<Pattern name\> \<LINES\>:Input pattern name, options or press Enter > ## The Mode Name > > Specify the style name of hatch pattern.<a id="WSfacf1429558a55de652e9e100dca19229-7f67"></a>Specifies the type of hatch and the pattern. > > Proceed (P)/specify the angle of cursor\<current\>: input the angular value, input P ,or press ENTER key > > Proceed > > Specify the row space \<current\>: input the value of row space, or press ENTER key > > Whether hatching area in double directions?\<current \>: input yes or not ,or press ENTER key > > Hatch directly pressing Enter key/ \< select hatch boundary object \>: select object, or press ENTER key > > Select hatch boundary object > > Select object to specify the outer boundary of hatch area, define the hatch boundary with selecting the inner object of the selected object. > The whole block will be selected if the Selected object is a part of a block. > The Command will be off and hatch will be created if pressing ENTER key. > > Direct hatch > > The boundary will be saved as a polyline \< not (N)\>: input Y or N ,or press ENTER key > > Input Y ,the boundary will be saved as a polyline. The boundary will be abandoned if you enter N after hatch Command. > > The start point: specify a point > > Current lineweight: specify lineweight > > Arc(A)/Distance(D)/Follow(F)/Half(H)/Weight(W)/ \<Next point(N)\>: specify the next point, or input options > > You can refer PLINE Command about the above Command prompt .press ENTER key when finishing. HATCH Command will prompt to create other polyline boundary . > > Execute hatch through pressing Enter key/\<start point \>: specify new start point, or press ENTER key > > If specify a point, continue to prompt to input other points. Command will be off and create hatch if press ENTER key. > **List Mode** > > The existing mode name and related information will be displayed in text window list. > > List mode \<\*\>: input \* ,or press ENTER key > > **Set(SE)** > > Open "drafting settings "Dialog Box. You can do some related settings for hatch. > > **Linear Hatch(\&)** > > Specify hatch pattern with line. > > Proceed(P)/specify the angle for the cursor line\<current \>:input the angular value, or input P , or press ENTER key > > Command prompt and selection "mode name" the same operation. > > **Preview(P)** > > Enter "preview" mode and set the related attributes in preview mode. > > Preview mode: list mode/set(SE)/linear hatch(\&)/\<current \>: input options, or press ENTER key > > List Mode > > The exiting mode name and related information will be displayed in text window list. > > list mode \<\*\>: input\* ,or press ENTER key > > Set > > Open "drafting settings" Dialog Box. You can do some related settings for hatch. > > Linear Hatch > > The same operation with "linear hatch". > > **Style(ST)** > > Confirm the way of filling inner boundary object according to specified style. > > The used hatch mode: All(A)/Outer(O)/\<Standard(S)\>: input options, or press ENTER key > > Standard > > Hatch from the outermost boundary to the innermost boundary. > > All > > Do some hatch for outer object, ignore inner objects. > > Outer > > System only fill the outermost of the structure, doesn't fill the inner and keep blank because the hatch begins with the two endpoints of hatch line. > The hatch will be ended if having intersection when hatching. ## Other versions with matching text [GstarCAD 2012](../../../2012/Commands/H/HATCH%20Command.md)